Vulnerabilities (CVE)

This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Password Reset Page) of the vulnerable targeted system.

This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Login Page) of the vulnerable targeted system.

journalpump is a daemon that takes log messages from journald and pumps them to a given output. A logging vulnerability was found in journalpump which logs out the configuration of a service integration in plaintext to the supplied logging pipeline, including credential information contained in the configuration if any. The problem has been patched in journalpump 2.5.0.

IBM PowerSC 1.3, 2.0, and 2.1 MFA does not implement the "HTTP Strict Transport Security" (HSTS) web security policy mechanism. IBM X-Force ID: 276004.

An attacker with network access could perform a man-in-the-middle (MitM) attack and capture sensitive information to gain unauthorized access to the application.

A flaw was found in the Keycloak package, more specifically org.keycloak.userprofile. When a user registers itself through registration flow, the "password" and "password-confirm" field from the form will occur as regular user attributes. All users and clients with proper rights and roles are able to read users attributes, allowing a malicious user with minimal access to retrieve the users passwords in clear text, jeopardizing their environment.

The Android Client application, when enrolled with the define method 1 (the user manually inserts the server ip address), use HTTP protocol to retrieve sensitive information (ip address and credentials to connect to a remote MQTT broker entity) instead of HTTPS and this feature is not configurable by the user. Due to the lack of encryption of HTTP,this issue allows an attacker placed in the same subnet network of the HMI device to intercept username and password necessary to authenticate to the ... The Android Client application, when enrolled with the define method 1 (the user manually inserts the server ip address), use HTTP protocol to retrieve sensitive information (ip address and credentials to connect to a remote MQTT broker entity) instead of HTTPS and this feature is not configurable by the user. Due to the lack of encryption of HTTP,this issue allows an attacker placed in the same subnet network of the HMI device to intercept username and password necessary to authenticate to the MQTT server responsible to implement the remote management protocol.

Show More

A vulnerability has been identified in COMOS (All versions < V10.4.4). Caching system in the affected application leaks sensitive information such as user and project information in cleartext via UDP.

BIG-IP APM clients may send IP traffic outside of the VPN tunnel.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

BIG-IP APM clients may send IP traffic outside of the VPN tunnel.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Improper usage of insecure protocol (i.e. HTTP) in SogouSDK of Chinese Samsung Keyboard prior to versions 5.3.70.1 in Android 11, 5.4.60.49, 5.4.85.5, 5.5.00.58 in Android 12, and 5.6.00.52, 5.6.10.42, 5.7.00.45 in Android 13 allows adjacent attackers to access keystroke data using Man-in-the-Middle attack.

An issue in CloudExplorer Lite 1.3.1 allows an attacker to obtain sensitive information via the login key component.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.8 and 6.1.0.0 through 6.1.2.3 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 265559.

The affected product is vulnerable to a cleartext transmission of sensitive information vulnerability, which may allow an attacker with access to the network, where clients have access to the DexGate server, could capture traffic. The attacker can later us the information within it to access the application.

A vulnerability has been identified in QMS Automotive (All versions < V12.39). The affected application lacks security control to prevent unencrypted communication without HTTPS. An attacker who managed to gain machine-in-the-middle position could manipulate, or steal confidential information.

An attacker with access to the network where the affected devices are located could maliciously actions to obtain, via a sniffer, sensitive information exchanged via TCP communications.

A vulnerability was found in Intergard SGS 8.7.0. It has been declared as problematic. This vulnerability affects unknown code of the component SQL Query Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-234448. NOTE: The vendor was con ... A vulnerability was found in Intergard SGS 8.7.0. It has been declared as problematic. This vulnerability affects unknown code of the component SQL Query Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-234448. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

A vulnerability was found in Intergard SGS 8.7.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Password Change Handler. The manipulation leads to cleartext transmission of sensitive information. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. VDB-234446 is the identifier assigned to this vulnerability. NOT ... A vulnerability was found in Intergard SGS 8.7.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Password Change Handler. The manipulation leads to cleartext transmission of sensitive information. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. VDB-234446 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

A flaw was found in Red Hat OpenShift Data Science. When exporting a pipeline from the Elyra notebook pipeline editor as Python DSL or YAML, it reads S3 credentials from the cluster (ds pipeline server) and saves them in plain text in the generated output instead of an ID for a Kubernetes secret.

Cleartext Transmission of Sensitive Information in the SICK ICR890-4 could allow a remote attacker to gather sensitive information by intercepting network traffic that is not encrypted.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as mes ... Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

Show More

ASUS RT-AC66U B1 3.0.0.4.286_51665 was discovered to transmit sensitive information in cleartext.

IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in environment variables which could aid in further attacks against the system. IBM X-Force ID: 260736.

IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in container images which could lead to further attacks against the system. IBM X-Force ID: 260730.

An issue was discovered in Avira Phantom VPN through 2.23.1 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel, even if this traffic is not generated by the VPN client, while simultaneously using plaintext DNS to look up the VPN server's IP address. This allows an adversary to trick the victim into sending traffic to arbitrary IP addresses in plaintext outside the VPN tunnel. NOT ... An issue was discovered in Avira Phantom VPN through 2.23.1 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel, even if this traffic is not generated by the VPN client, while simultaneously using plaintext DNS to look up the VPN server's IP address. This allows an adversary to trick the victim into sending traffic to arbitrary IP addresses in plaintext outside the VPN tunnel. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "ServerIP attack, combined with DNS spoofing, that can leak traffic to an arbitrary IP address" rather than to only Avira Phantom VPN.

Show More

An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that traffic to the local network is sent in plaintext outside the VPN tunnel even if the local network is using a non-RFC1918 IP subnet. This allows an adversary to trick the victim into sending arbitrary IP traffic in plaintext outside the VPN tunnel. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "LocalNet att ... An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that traffic to the local network is sent in plaintext outside the VPN tunnel even if the local network is using a non-RFC1918 IP subnet. This allows an adversary to trick the victim into sending arbitrary IP traffic in plaintext outside the VPN tunnel. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "LocalNet attack resulting in leakage of traffic in plaintext" rather than to only Clario.

Show More

An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel even if this traffic is not generated by the VPN client. This allows an adversary to trick the victim into sending plaintext traffic to the VPN server's IP address and thereby deanonymize the victim. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID ... An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel even if this traffic is not generated by the VPN client. This allows an adversary to trick the victim into sending plaintext traffic to the VPN server's IP address and thereby deanonymize the victim. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "ServerIP attack for only traffic to the real IP address of the VPN server" rather than to only Clario.

Show More

An issue was discovered in YSoft SAFEQ 6 Server before 6.0.82. When modifying the URL of the LDAP server configuration from LDAPS to LDAP, the system does not require the password to be (re)entered. This results in exposing cleartext credentials when connecting to a rogue LDAP server. NOTE: the vendor originally reported this as a security issue but then reconsidered because of the requirement for Admin access in order to change the configuration.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially crafted series of network requests can lead to arbitrary authentication. An attacker can sniff network traffic to trigger this vulnerability.

A cleartext transmission of sensitive information vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability possibly allows local network clients to read the contents of unexpected sensitive data via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QuTS hero h5.1.0.2424 build 20230609 and later

Baker Hughes – Bently Nevada 3500 System TDI Firmware version 5.05 contains a cleartext transmission vulnerability which could allow an attacker to steal the authentication secret from communication traffic to the device and reuse it for arbitrary requests.

Cleartext Transmission of Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Server, Device Manager Agent, Host Data Collector components) allows Interception.This issue affects Hitachi Device Manager: before 8.8.5-02.

OpenProject is web-based project management software. For any OpenProject installation, a `robots.txt` file is generated through the server to denote which routes shall or shall not be accessed by crawlers. These routes contain project identifiers of all public projects in the instance. Prior to version 12.5.6, even if the entire instance is marked as `Login required` and prevents all truly anonymous access, the `/robots.txt` route remains publicly available. Version 12.5.6 has a fix for this i ... OpenProject is web-based project management software. For any OpenProject installation, a `robots.txt` file is generated through the server to denote which routes shall or shall not be accessed by crawlers. These routes contain project identifiers of all public projects in the instance. Prior to version 12.5.6, even if the entire instance is marked as `Login required` and prevents all truly anonymous access, the `/robots.txt` route remains publicly available. Version 12.5.6 has a fix for this issue. Alternatively, users can download a patchfile to apply the patch to any OpenProject version greater than 10.0 As a workaround, one may mark any public project as non-public and give anyone in need of access to the project a membership.

Show More

IBM Security Verify Governance 10.0 does not encrypt sensitive or critical information before storage or transmission. IBM X-Force ID: 256020.

Highlight is an open source, full-stack monitoring platform. Highlight may record passwords on customer deployments when a password html input is switched to `type="text"` via a javascript "Show Password" button. This differs from the expected behavior which always obfuscates `type="password"` inputs. A customer may assume that switching to `type="text"` would also not record this input; hence, they would not add additional `highlight-mask` css-class obfuscation to this part of the DOM, resultin ... Highlight is an open source, full-stack monitoring platform. Highlight may record passwords on customer deployments when a password html input is switched to `type="text"` via a javascript "Show Password" button. This differs from the expected behavior which always obfuscates `type="password"` inputs. A customer may assume that switching to `type="text"` would also not record this input; hence, they would not add additional `highlight-mask` css-class obfuscation to this part of the DOM, resulting in unintentional recording of a password value when a `Show Password` button is used. This issue was patched in version 6.0.0. This patch tracks changes to the `type` attribute of an input to ensure an input that used to be a `type="password"` continues to be obfuscated.

Show More

An issue found in Marui Co Marui Official app v.13.6.1 allows a remote attacker to gain access to sensitive information via the channel access token in the miniapp Marui Official Store function.

A remote unprivileged attacker can intercept the communication via e.g. Man-In-The-Middle, due to the absence of Transport Layer Security (TLS) in the SICK EventCam App. This lack of encryption in the communication channel can lead to the unauthorized disclosure of sensitive information. The attacker can exploit this weakness to eavesdrop on the communication between the EventCam App and the Client, and potentially manipulate the data being transmitted.

Snap One OvrC Pro versions prior to 7.3 use HTTP connections when downloading a program from their servers. Because they do not use HTTPS, OvrC Pro devices are susceptible to exploitation.

Baremetal Operator (BMO) is a bare metal host provisioning integration for Kubernetes. Prior to version 0.3.0, ironic and ironic-inspector deployed within Baremetal Operator using the included `deploy.sh` store their `.htpasswd` files as ConfigMaps instead of Secrets. This causes the plain-text username and hashed password to be readable by anyone having a cluster-wide read-access to the management cluster, or access to the management cluster's Etcd storage. This issue is patched in baremetal-op ... Baremetal Operator (BMO) is a bare metal host provisioning integration for Kubernetes. Prior to version 0.3.0, ironic and ironic-inspector deployed within Baremetal Operator using the included `deploy.sh` store their `.htpasswd` files as ConfigMaps instead of Secrets. This causes the plain-text username and hashed password to be readable by anyone having a cluster-wide read-access to the management cluster, or access to the management cluster's Etcd storage. This issue is patched in baremetal-operator PR#1241, and is included in BMO release 0.3.0 onwards. As a workaround, users may modify the kustomizations and redeploy the BMO, or recreate the required ConfigMaps as Secrets per instructions in baremetal-operator PR#1241.

Show More

Hitron Technologies CODA-5310’s Telnet function transfers sensitive data in plaintext. An unauthenticated remote attacker can exploit this vulnerability to access credentials of normal users and administrator.