Vulnerabilities (CVE)

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the SOAP interface. By default, all communication to/from the device's SOAP Interface (port 5000) is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

Netgear RAX43 version 1.0.3.96 does not utilize secure communications to the web interface. By default, all communication to/from the device is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains an security flaw in the web interface. HTTPS is not enabled on the device by default. This results in cleartext transmission of sensitive information such as passwords.

Weak configuration in WLAN could cause forwarding of unencrypted packets from one client to another in Snapdragon Compute, Snapdragon Connectivity

The Juniper Networks CTPView server is not enforcing HTTP Strict Transport Security (HSTS). HSTS is an optional response header which allows servers to indicate that content from the requested domain will only be served over HTTPS. The lack of HSTS may leave the system vulnerable to downgrade attacks, SSL-stripping man-in-the-middle attacks, and weakens cookie-hijacking protections. This issue affects Juniper Networks CTPView: 7.3 versions prior to 7.3R7; 9.1 versions prior to 9.1R3.

Rubetek SmartHome 2020 devices use unencrypted 433 MHz communication between controllers and beacons, allowing an attacker to sniff and spoof beacon requests remotely.

CS2 Network P2P through 3.x, as used in millions of Internet of Things devices, suffers from an information exposure flaw that exposes user session data to supernodes in the network, as demonstrated by passively eavesdropping on user video/audio streams, capturing credentials, and compromising devices.

An issue was discovered on HUMAX HGA12R-02 BRGCAA 1.1.53 devices. A vulnerability in the authentication functionality in the web-based interface could allow an unauthenticated remote attacker to capture packets at the time of authentication and gain access to the cleartext password. An attacker could use this access to create a new user account or control the device.

The Citytv Video application 4.08.0 for Android and 3.35 for iOS sends Unencrypted Analytics.

The Global TV application 2.3.2 for Android and 4.7.5 for iOS sends Unencrypted Analytics.

An internal product security audit of LXCO, prior to version 1.2.2, discovered that optional passwords, if specified, for the Syslog and SMTP forwarders are written to an internal LXCO log file in clear text. Affected logs are captured in the First Failure Data Capture (FFDC) service log. The FFDC service log is only generated when requested by a privileged LXCO user and it is only accessible to the privileged LXCO user that requested the file.

An internal product security audit of Lenovo XClarity Administrator (LXCA) prior to version 3.1.0 discovered the Windows OS credentials provided by the LXCA user to perform driver updates of managed systems may be captured in the First Failure Data Capture (FFDC) service log if the service log is generated while managed endpoints are updating. The service log is only generated when requested by a privileged LXCA user and it is only accessible to the privileged LXCA user that requested the file a ... An internal product security audit of Lenovo XClarity Administrator (LXCA) prior to version 3.1.0 discovered the Windows OS credentials provided by the LXCA user to perform driver updates of managed systems may be captured in the First Failure Data Capture (FFDC) service log if the service log is generated while managed endpoints are updating. The service log is only generated when requested by a privileged LXCA user and it is only accessible to the privileged LXCA user that requested the file and is then deleted.

Show More

SolarWinds N-central before 12.1 SP1 HF5 and 12.2 before SP1 HF2 allows remote attackers to retrieve cleartext domain admin credentials from the Agent & Probe settings, and obtain other sensitive information. The attacker can use a customer ID to self register and read any aspects of the agent/appliance configuration.

In the JetBrains Scala plugin before 2019.2.1, some artefact dependencies were resolved over unencrypted connections.

This affects all versions of package com.mintegral.msdk:alphab. The Android SDK distributed by the company contains malicious functionality in this module that tracks: 1. Downloads from Google urls either within Google apps or via browser including file downloads, e-mail attachments and Google Docs links. 2. All apk downloads, either organic or not. Mintegral listens to download events in Android's download manager and detects if the downloaded file's url contains: a. google.com or comes from a ... This affects all versions of package com.mintegral.msdk:alphab. The Android SDK distributed by the company contains malicious functionality in this module that tracks: 1. Downloads from Google urls either within Google apps or via browser including file downloads, e-mail attachments and Google Docs links. 2. All apk downloads, either organic or not. Mintegral listens to download events in Android's download manager and detects if the downloaded file's url contains: a. google.com or comes from a Google app (the com.android.vending package) b. Ends with .apk for apk downloads In both cases, the module sends the captured data back to Mintegral's servers. Note that the malicious functionality keeps running even if the app is currently not in focus (running in the background).

Show More

A vulnerability has been identified in SIMATIC HMI Basic Panels 1st Generation (incl. SIPLUS variants) (All versions), SIMATIC HMI Basic Panels 2nd Generation (incl. SIPLUS variants) (All versions), SIMATIC HMI Comfort Panels (incl. SIPLUS variants) (All versions), SIMATIC HMI KTP700F Mobile Arctic (All versions), SIMATIC HMI Mobile Panels 2nd Generation (All versions), SIMATIC WinCC Runtime Advanced (All versions). Unencrypted communication between the configuration software and the respective ... A vulnerability has been identified in SIMATIC HMI Basic Panels 1st Generation (incl. SIPLUS variants) (All versions), SIMATIC HMI Basic Panels 2nd Generation (incl. SIPLUS variants) (All versions), SIMATIC HMI Comfort Panels (incl. SIPLUS variants) (All versions), SIMATIC HMI KTP700F Mobile Arctic (All versions), SIMATIC HMI Mobile Panels 2nd Generation (All versions), SIMATIC WinCC Runtime Advanced (All versions). Unencrypted communication between the configuration software and the respective device could allow an attacker to capture potential plain text communication and have access to sensitive information.

Show More

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists which could leak sensitive information transmitted between the software and the Modicon M218, M241, M251, and M258 controllers.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 an ... **VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.

Show More

Cleartext Transmission of Sensitive Information between McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 February 2021 Update and McAfee Global Threat Intelligence (GTI) servers using DNS allows a remote attacker to view the requests from ENS and responses from GTI over DNS. By gaining control of an intermediate DNS server or altering the network DNS configuration, it is possible for an attacker to intercept requests and send their own responses.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, sensitive information is transmitted over some web applications in cleartext.

SAP Solution Manager (Diagnostics Agent), version 720, allows unencrypted connections from unauthenticated sources. This allows an attacker to control all remote functions on the Agent due to Missing Authentication Check.

SAP Business Objects Business Intelligence Platform (CMC), version 4.1, 4.2, shows cleartext password in the response, leading to Information Disclosure. It involves social engineering in order to gain access to system and If password is known, it would give administrative rights to the attacker to read/modify delete the data and rights within the system.

In NGINX Controller 3.0.0-3.4.0, recovery code required to change a user's password is transmitted and stored in the database in plain text, which allows an attacker who can intercept the database connection or have read access to the database, to request a password reset using the email address of another registered user then retrieve the recovery code.

In versions 7.1.5-7.1.8, when a user connects to a VPN using BIG-IP Edge Client over an unsecure network, BIG-IP Edge Client responds to authentication requests over HTTP while sending probes for captive portal detection.

On versions 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1, BIG-IP systems setup for connection mirroring in a High Availability (HA) pair transfers sensitive cryptographic objects over an insecure communications channel. This is a control plane issue which is exposed only on the network used for connection mirroring.

On versions 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1, BIG-IP systems set up for connection mirroring in a high availability (HA) pair transfer sensitive cryptographic objects over an insecure communications channel. This is a control plane issue which is exposed only on the network used for connection mirroring.

On BIG-IP ASM 11.6.1-11.6.5.1, under certain configurations, the BIG-IP system sends data plane traffic to back-end servers unencrypted, even when a Server SSL profile is applied.

On BIG-IP 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, a race condition exists where mcpd and other processes may make unencrypted connection attempts to a new configuration sync peer. The race condition can occur when changing the ConfigSync IP address of a peer, adding a new peer, or when the Traffic Management Microkernel (TMM) first starts up.

In versions prior to 3.3.0, the NGINX Controller Agent installer script 'install.sh' uses HTTP instead of HTTPS to check and install packages

In versions prior to 3.3.0, the NGINX Controller is configured to communicate with its Postgres database server over unencrypted channels, making the communicated data vulnerable to interception via man-in-the-middle (MiTM) attacks.

On BIG-IP 15.0.0-15.1.0.2, 14.1.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5.1, and 11.5.2-11.6.5.1 and BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, in a High Availability (HA) network failover in Device Service Cluster (DSC), the failover service does not require a strong form of authentication and HA network failover traffic is not encrypted by Transport Layer Security (TLS).

Mitsubishi Electric MELSEC iQ-R, iQ-F, Q, L, and FX series CPU modules all versions contain a vulnerability that allows cleartext transmission of sensitive information between CPU modules and GX Works3 and/or GX Works2 via unspecified vectors.

Scheduler for TAS prior to version 1.4.0 was permitting plaintext transmission of UAA client token by sending it over a non-TLS connection. This also depended on the configuration of the MySQL server which is used to cache a UAA client token used by the service. If intercepted the token can give an attacker admin level access in the cloud controller.

Cloud Foundry CredHub, versions prior to 2.5.10, connects to a MySQL database without TLS even when configured to use TLS. A malicious user with access to the network between CredHub and its MySQL database may eavesdrop on database connections and thereby gain unauthorized access to CredHub and other components.

IBM QRadar SIEM 7.3 and 7.4 uses less secure methods for protecting data in transit between hosts when encrypt host connections is not enabled as well as data at rest. IBM X-Force ID: 192539.

IBM Security Identity Governance and Intelligence 5.2.4, 5.2.5, and 5.2.6 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 192429.

IBM Security Identity Governance and Intelligence 5.2.6 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM API Connect 5.0.0.0 through 5.0.8.10 could potentially leak sensitive information or allow for data corruption due to plain text transmission of sensitive information across the network. IBM X-Force ID: 190990.