Vulnerabilities (CVE)

An issue was discovered in ONAP HOLMES before Dublin. By accessing port 9202 of dep-holmes-engine-mgmt pod, an unauthenticated attacker (who already has access to pod-to-pod communication) may execute arbitrary code inside that pod. All ONAP Operations Manager (OOM) setups are affected.

In Supervisor through 4.0.2, an unauthenticated user can read log files or restart a service. Note: The maintainer responded that the affected component, inet_http_server, is not enabled by default but if the user enables it and does not set a password, Supervisor logs a warning message. The maintainer indicated the ability to run an open server will not be removed but an additional warning was added to the documentation

Improper Access Control in the RCP+ server of the Bosch Video Recording Manager (VRM) component allows arbitrary and unauthenticated access to a limited subset of certificates, stored in the underlying Microsoft Windows operating system. The fixed versions implement modified authentication checks. Prior releases of VRM software version 3.70 are considered unaffected. This vulnerability affects VRM v3.70.x, v3.71 < v3.71.0034 and v3.81 < 3.81.0050; DIVAR IP 5000 3.80 < 3.80.0039; BVMS all version ... Improper Access Control in the RCP+ server of the Bosch Video Recording Manager (VRM) component allows arbitrary and unauthenticated access to a limited subset of certificates, stored in the underlying Microsoft Windows operating system. The fixed versions implement modified authentication checks. Prior releases of VRM software version 3.70 are considered unaffected. This vulnerability affects VRM v3.70.x, v3.71 < v3.71.0034 and v3.81 < 3.81.0050; DIVAR IP 5000 3.80 < 3.80.0039; BVMS all versions using VRM.

Show More

Anviz Global M3 Outdoor RFID Access Control executes any command received from any source. No authentication/encryption is done. Attackers can fully interact with the device: for example, send the "open door" command, download the users list (which includes RFID codes and passcodes in cleartext), or update/create users. The same attack can be executed on a local network and over the internet (if the device is exposed on a public IP address).

In versions of Couchbase Server prior to 5.0, the bucket named "default" was a special bucket that allowed read and write access without authentication. As part of 5.0, the behavior of all buckets including "default" were changed to only allow access by authenticated users with sufficient authorization. However, users were allowed unauthenticated and unauthorized access to the "default" bucket if the properties of this bucket were edited. This has been fixed in versions 5.1.0 and 5.5.0.

In Couchbase Server 6.0.0 and 5.5.0, the eventing service exposes system diagnostic profile via an HTTP endpoint that does not require credentials on a port earmarked for internal traffic only. This has been remedied in version 6.0.1 and now requires valid credentials to access.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. The router opens TCP port 8010. Users can send hnap requests to this port without authentication to obtain information such as the MAC addresses of connected client devices.

A broken access control vulnerability in SmartHome app (Android versions up to 3.0.42_190515, ios versions up to 2.0.22) allows an attacker in the same local area network to list user accounts and control IoT devices that connect with its gateway (HG100) via http://[target]/smarthome/devicecontrol without any authentication. CVSS 3.0 base score 10 (Confidentiality, Integrity and Availability impacts). CVSS vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).

A broken access control vulnerability in HG100 firmware versions up to 4.00.06 allows an attacker in the same local area network to control IoT devices that connect with itself via http://[target]/smarthome/devicecontrol without any authentication. CVSS 3.0 base score 10 (Confidentiality, Integrity and Availability impacts). CVSS vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).

Lack of authentication in file-viewing components in DDRT Dashcom Live 2019-05-09 allows anyone to remotely access all claim details by visiting easily guessable dashboard/uploads/claim_files/claim_id_ URLs.

Lack of authentication in case-exporting components in DDRT Dashcom Live through 2019-05-08 allows anyone to remotely access all claim details by visiting easily guessable exportpdf/all_claim_detail.php?claim_id= URLs.

Fujifilm FCR Capsula X/ Carbon X/ FCR XC-2, model versions CR-IR 357 FCR Carbon X, CR-IR 357 FCR XC-2, FCR-IR 357 FCR Capsula X provide insecure telnet services that lack authentication requirements. An attacker who successfully exploits this vulnerability may be able to access the underlying operating system.

An issue was discovered in Joomla! before 3.9.5. The "refresh list of helpsites" endpoint of com_users lacks access checks, allowing calls from unauthenticated users.

A vulnerability has been identified in SINEMA Server (All versions < V14 SP3). Missing authentication for functionality that requires administrative user identity could allow an attacker to obtain encoded system configuration backup files. This is only possible through network access to the affected system, and successful exploitation requires no system privileges.

A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier (All versions), SIMATIC PCS 7 V8.1 and newer (All versions), SIMATIC WinCC V7.2 and earlier (All versions), SIMATIC WinCC V7.3 and newer (All versions). An attacker with network access to affected installations, which are configured without "Encrypted Communication", can execute arbitrary code. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected installation. No user ... A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier (All versions), SIMATIC PCS 7 V8.1 and newer (All versions), SIMATIC WinCC V7.2 and earlier (All versions), SIMATIC WinCC V7.3 and newer (All versions). An attacker with network access to affected installations, which are configured without "Encrypted Communication", can execute arbitrary code. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected installation. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality, integrity, and availability of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

Show More

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Attackers with access to port 10005/tcp could perform device reconfigurations and obtain project files from the devices. The system manual recommends to protect access to this port. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confide ... A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Attackers with access to port 10005/tcp could perform device reconfigurations and obtain project files from the devices. The system manual recommends to protect access to this port. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality, integrity, and availability of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

Show More

A vulnerability has been identified in TIA Administrator (All versions < V1.0 SP1 Upd1). The integrated configuration web application (TIA Administrator) allows to execute certain application commands without proper authentication. The vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise confidentiality and integrity and availability o ... A vulnerability has been identified in TIA Administrator (All versions < V1.0 SP1 Upd1). The integrated configuration web application (TIA Administrator) allows to execute certain application commands without proper authentication. The vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise confidentiality and integrity and availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

Show More

An incorrect access control exists in the Sony Photo Sharing Plus application in the firmware before PKG6.5629 version (for the X7500D TV and other applicable TVs). This vulnerability allows an attacker to read arbitrary files without authentication over HTTP when Photo Sharing Plus application is running. This may allow an attacker to browse a particular directory (e.g. images) inside the private network.

An issue was discovered in LibreNMS through 1.47. A number of scripts import the Authentication libraries, but do not enforce an actual authentication check. Several of these scripts disclose information or expose functions that are of a sensitive nature and are not expected to be publicly accessible.

An authentication bypass vulnerability was discovered in foreman-tasks before 0.15.7. Previously, commit tasks were searched through find_resource, which performed authorization checks. After the change to Foreman, an unauthenticated user can view the details of a task through the web UI or API, if they can discover or guess the UUID of the task.

eQ-3 HomeMatic CCU2 devices before 2.41.8 and CCU3 devices before 3.43.15 use session IDs for authentication but lack authorization checks. An attacker can obtain a session ID via the user authentication dialogue, aka HMCCU-153. This leads to automatic login as admin.

eQ-3 HomeMatic CCU2 devices before 2.41.8 and CCU3 devices before 3.43.16 use session IDs for authentication but lack authorization checks. An attacker can obtain a session ID via an invalid login attempt to the RemoteApi account, aka HMCCU-154. This leads to automatic login as admin.

An unauthenticated attacker can obtain information about the Pydio 8.2.2 configuration including session timeout, libraries, and license information.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/LoadDefaultSettings to reset the router without authentication.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/form2userconfig.cgi to edit the system account without authentication.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use a hidden API URL /goform/SystemCommand to execute a system command without authentication.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/setSysAdm to edit the web or system account without authentication.

ChinaMobile GPN2.4P21-C-CN W2001EN-00 is affected by: Incorrect Access Control - Unauthenticated Remote Reboot. The impact is: PLC Wireless Router's are vulnerable to an unauthenticated remote reboot due. The component is: Reboot settings are available to unauthenticated users instead of only authenticaed users. The attack vector is: Remote.

SAP Process Integration, business-to-business add-on, versions 1.0, 2.0, does not perform authentication check properly when the default security provider is changed to BouncyCastle (BC), leading to Missing Authentication Check

Several web pages provided SAP NetWeaver Process Integration (versions: SAP_XIESR: 7.10 to 7.11, 7.20, 7.30, 7.31, 7.40, 7.50 and SAP_XITOOL: 7.10 to 7.11, 7.30, 7.31, 7.40, 7.50) are not password protected. An attacker could access landscape information like host names, ports or other technical data in the absence of restrictive firewall and port settings.

Under certain circumstances, SAP HANA Extended Application Services, advanced model (XS advanced) does not perform authentication checks properly for XS advanced platform and business users. Fixed in 1.0.97 to 1.0.99 (running on SAP HANA 1 or SAP HANA 2 SPS0 (second S stands for stack)).

SAP Cloud Connector, before version 2.11.3, does not perform any authentication checks for functionalities that require user identity.

Contec Smart Home 4.15 devices do not require authentication for new_user.php, edit_user.php, delete_user.php, and user.php, as demonstrated by changing the admin password and then obtaining control over doors.

An attacker with physical access to a BrilliantTS FUZE card (MCU firmware 0.1.73, BLE firmware 0.7.4) can unlock the card, extract credit card numbers, and tamper with data on the card via Bluetooth because no authentication is needed, as demonstrated by gatttool.

The default configuration in Apache Cassandra 3.8 through 3.11.1 binds an unauthenticated JMX/RMI interface to all network interfaces, which allows remote attackers to execute arbitrary Java code via an RMI request. This issue is a regression of CVE-2015-0225. The regression was introduced in https://issues.apache.org/jira/browse/CASSANDRA-12109. The fix for the regression is implemented in https://issues.apache.org/jira/browse/CASSANDRA-14173. This fix is contained in the 3.11.2 release of Apac ... The default configuration in Apache Cassandra 3.8 through 3.11.1 binds an unauthenticated JMX/RMI interface to all network interfaces, which allows remote attackers to execute arbitrary Java code via an RMI request. This issue is a regression of CVE-2015-0225. The regression was introduced in https://issues.apache.org/jira/browse/CASSANDRA-12109. The fix for the regression is implemented in https://issues.apache.org/jira/browse/CASSANDRA-14173. This fix is contained in the 3.11.2 release of Apache Cassandra.

Show More

In Schneider Electric Evlink Charging Station versions prior to v3.2.0-12_v1, the Web Interface has an issue that may allow a remote attacker to gain administrative privileges without properly authenticating remote users.

ZTE ZXHN H168N product with versions V2.2.0_PK1.2T5, V2.2.0_PK1.2T2, V2.2.0_PK11T7 and V2.2.0_PK11T have an improper access control vulnerability, which may allow an unauthorized user to gain unauthorized access.

eQ-3 AG HomeMatic CCU2 2.29.22 devices have an open XML-RPC port without authentication. This can be exploited by sending arbitrary XML-RPC requests to control the attached BidCos devices.

A missing authentication for appliance registration vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow an attacker to manipulate the registration process of the product to reset configuration parameters.

NetApp OnCommand Unified Manager for Linux versions 7.2 though 7.3 ship with the Java Debug Wire Protocol (JDWP) enabled which allows unauthorized local attackers to execute arbitrary code.