Vulnerabilities (CVE)

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to ... A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

Show More

A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls ... A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls and obtain access to the network. Cisco Bug IDs: CSCvg69701.

Show More

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password val ... A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

Show More

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to be authorized as a subscriber without providing a valid password; however, the attacker must provide a valid username. The vulnerability is due to incorrect RADIUS user credential validation. An attacker could exploit this vulnerability by attempting to access a Cisco Policy Suite domain configured with RADIUS authentication. An exploit could allow the attacker to be autho ... A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to be authorized as a subscriber without providing a valid password; however, the attacker must provide a valid username. The vulnerability is due to incorrect RADIUS user credential validation. An attacker could exploit this vulnerability by attempting to access a Cisco Policy Suite domain configured with RADIUS authentication. An exploit could allow the attacker to be authorized as a subscriber without providing a valid password. This vulnerability affects the Cisco Policy Suite application running a release prior to 13.1.0 with Hotfix Patch 1 when RADIUS authentication is configured for a domain. Cisco Policy Suite Release 14.0.0 is also affected, as it includes vulnerable code, but RADIUS authentication is not officially supported in Cisco Policy Suite Releases 14.0.0 and later. Cisco Bug IDs: CSCvg40124.

Show More

A vulnerability in the FTP server of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to log in to the FTP server of the device without a valid password. The attacker does need to have a valid username. The vulnerability is due to incorrect FTP user credential validation. An attacker could exploit this vulnerability by using FTP to connect to the management IP address of the targeted device. A successful exploit could allow the attacker to log in to the FTP ... A vulnerability in the FTP server of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to log in to the FTP server of the device without a valid password. The attacker does need to have a valid username. The vulnerability is due to incorrect FTP user credential validation. An attacker could exploit this vulnerability by using FTP to connect to the management IP address of the targeted device. A successful exploit could allow the attacker to log in to the FTP server of the Cisco WSA without having a valid password. This vulnerability affects Cisco AsyncOS for WSA Software on both virtual and hardware appliances that are running any release of Cisco AsyncOS 10.5.1 for WSA Software. The device is vulnerable only if FTP is enabled on the management interface. FTP is disabled by default. Cisco Bug IDs: CSCvf74281.

Show More

An authentication bypass vulnerability in the initial boot sequence of Juniper Networks Junos OS on vSRX Series may allow an attacker to gain full control of the system without authentication when the system is initially booted up. Affected releases are Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D30 on vSRX.

If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. T ... If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.

Show More

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

An unauthenticated root login may allow upon reboot when a commit script is used. A commit script allows a device administrator to execute certain instructions during commit, which is configured under the [system scripts commit] stanza. Certain commit scripts that work without a problem during normal commit may cause unexpected behavior upon reboot which can leave the system in a state where root CLI login is allowed without a password due to the system reverting to a "safe mode" authentication ... An unauthenticated root login may allow upon reboot when a commit script is used. A commit script allows a device administrator to execute certain instructions during commit, which is configured under the [system scripts commit] stanza. Certain commit scripts that work without a problem during normal commit may cause unexpected behavior upon reboot which can leave the system in a state where root CLI login is allowed without a password due to the system reverting to a "safe mode" authentication state. Lastly, only logging in physically to the console port as root, with no password, will work. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71 on SRX; 12.3X48 versions prior to 12.3X48-D55 on SRX; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D40 on QFX, EX; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F5-S7, 15.1F6-S8, 15.1R5-S6, 15.1R6; 15.1X49 versions prior to 15.1X49-D110 on SRX; 15.1X53 versions prior to 15.1X53-D232 on QFX5200/5110; 15.1X53 versions prior to 15.1X53-D49, 15.1X53-D470 on NFX; 15.1X53 versions prior to 15.1X53-D65 on QFX10K; 16.1 versions prior to 16.1R2. No other Juniper Networks products or platforms are affected by this issue.

Show More

The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication.

The National Payments Corporation of India BHIM application 1.3 for Android does not properly restrict use of the OTP feature, which makes it easier for attackers to bypass authentication.

Authentication Bypass vulnerability in Accellion kiteworks before 2017.01.00 allows remote attackers to execute certain API calls on behalf of a web user using a gathered token via a POST request to /oauth/token.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device allows a user to install applications written in the Lua programming language. Also the interface allows any user to write his/her application in the Lua language. However, this functionality is not protected by authentication and this allows an attacker to run arbitrary Lua code on the device. Th ... An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device allows a user to install applications written in the Lua programming language. Also the interface allows any user to write his/her application in the Lua language. However, this functionality is not protected by authentication and this allows an attacker to run arbitrary Lua code on the device. The POST request is forwarded to LuaUPNP daemon on the device. This binary handles the received Lua code in the function "LU::JobHandler_LuaUPnP::RunLua(LU::JobHandler_LuaUPnP *__hidden this, LU::UPnPActionWrapper *)". The value in the "code" parameter is then passed to the function "LU::LuaInterface::RunCode(char const*)" which actually loads the Lua engine and runs the code.

Show More

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "wget" as one of the service actions for a normal user to connect the device to an external website. It retrieves the parameter "URL" from the query string and then passes it to an internal function that uses the curl module on the device to retrieve ... An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "wget" as one of the service actions for a normal user to connect the device to an external website. It retrieves the parameter "URL" from the query string and then passes it to an internal function that uses the curl module on the device to retrieve the contents of the website.

Show More

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requ ... An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

Show More

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

QNAP NAS application Proxy Server through version 1.2.0 does not authenticate requests properly. Successful exploitation can lead to change of the settings of Proxy Server.

QNAP NAS application Media Streaming add-on version 421.1.0.2, 430.1.2.0, and earlier does not authenticate requests properly. Successful exploitation could lead to change of the Media Streaming settings, and leakage of sensitive information of the QNAP NAS.

An authentication bypass flaw was found in the way krb5's certauth interface before 1.16.1 handled the validation of client certificates. A remote attacker able to communicate with the KDC could potentially use this flaw to impersonate arbitrary principals under rare and erroneous circumstances.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

Detcon Sitewatch Gateway, all versions without cellular, an attacker can edit settings on the device using a specially crafted URL.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

NetIQ iManager before 3.0.3 delivered a SSL private key in a Java application (JAR file) for authentication to Sentinel, allowing attackers to extract and establish their own connections to the Sentinel appliance.

Bypassing password security vulnerability in McAfee Application and Change Control (MACC) 7.0.1 and 6.2.0 allows authenticated users to perform arbitrary command execution via a command-line utility.

Some Lenovo System x server BIOS/UEFI versions, when Secure Boot mode is enabled by a system administrator, do not properly authenticate signed code before booting it. As a result, an attacker with physical access to the system could boot unsigned code.

In Enterprise Networking Operating System (ENOS) in Lenovo and IBM RackSwitch and BladeCenter products, an authentication bypass known as "HP Backdoor" was discovered during a Lenovo security audit in the serial console, Telnet, SSH, and Web interfaces. This bypass mechanism can be accessed when performing local authentication under specific circumstances. If exploited, admin-level access to the switch is granted.

Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A HTTP request can allow for a user to perform a firmware upgrade using a crafted image. Before any firmware upgrades in this image are flashed to the device, binaries as well as arguments to shell commands contained in the image are executed with elevated privileges.

Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. An attacker who is in the same subnetwork of the camera or has remote administrator access can fully compromise the device by performing a firmware recovery using a custom image.

It was found that dropbear before version 2013.59 with GSSAPI leaks whether given username is valid or invalid. When an invalid username is given, the GSSAPI authentication failure was incorrectly counted towards the maximum allowed number of password attempts.

It was found that there were no permission checks performed in the Distributed Fork plugin before and including 1.5.0 for Jenkins that provides the dist-fork CLI command beyond the basic check for Overall/Read permission, allowing anyone with that permission to run arbitrary shell commands on all connected nodes.

It was found that the REST API in Infinispan before version 9.0.0 did not properly enforce auth constraints. An attacker could use this vulnerability to read or modify data in the default cache or a known cache name.

curl, as shipped in Red Hat Enterprise Linux 6 before version 7.19.7-53, did not correctly backport the fix for CVE-2015-3148 because it did not reflect the fact that the HAVE_GSSAPI define was meanwhile substituted by USE_HTTP_NEGOTIATE. This issue was introduced in RHEL 6.7 and affects RHEL 6 curl only.

In Jenkins before versions 2.44, 2.32.2 low privilege users were able to act on administrative monitors due to them not being consistently protected by permission checks (SECURITY-371).

Puppet Enterprise versions prior to 2016.4.5 and 2017.2.1 did not correctly authenticate users before returning labeled RBAC access tokens. This issue has been fixed in Puppet Enterprise 2016.4.5 and 2017.2.1. This only affects users with labeled tokens, which is not the default for tokens.

A vulnerability, which was classified as critical, was found in Itech Job Portal Script 9.13. This affects an unknown part of the file /admin. The manipulation leads to improper authentication. It is possible to initiate the attack remotely.

IBM Cognos Analytics 11.0 could allow a local user to change parameters set from the Cognos Analytics menus without proper authentication. IBM X-Force ID: 136857.

An issue was discovered in Mattermost Server before 3.7.0 and 3.6.3. Attackers can use the API for unauthenticated team creation.