Vulnerabilities (CVE)

When the "Intrusion Detection Service" (IDS) feature is configured on Juniper Networks MX series with a dynamic firewall filter using IPv6 source or destination prefix, it may incorrectly match the prefix as /32, causing the filter to block unexpected traffic. This issue affects only IPv6 prefixes when used as source and destination. This issue affects MX Series devices using MS-MPC, MS-MIC or MS-SPC3 service cards with IDS service configured. This issue affects: Juniper Networks Junos OS 17.3 v ... When the "Intrusion Detection Service" (IDS) feature is configured on Juniper Networks MX series with a dynamic firewall filter using IPv6 source or destination prefix, it may incorrectly match the prefix as /32, causing the filter to block unexpected traffic. This issue affects only IPv6 prefixes when used as source and destination. This issue affects MX Series devices using MS-MPC, MS-MIC or MS-SPC3 service cards with IDS service configured. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S10 on MX Series; 17.4 versions prior to 17.4R3-S3 on MX Series; 18.1 versions prior to 18.1R3-S11 on MX Series; 18.2 versions prior to 18.2R3-S6 on MX Series; 18.3 versions prior to 18.3R3-S4 on MX Series; 18.4 versions prior to 18.4R3-S6 on MX Series; 19.1 versions prior to 19.1R2-S2, 19.1R3-S3 on MX Series; 19.2 versions prior to 19.2R3-S1 on MX Series; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1 on MX Series; 19.4 versions prior to 19.4R3 on MX Series; 20.1 versions prior to 20.1R2 on MX Series; 20.2 versions prior to 20.2R2 on MX Series;

Show More

NAVER Whale browser mobile app before 1.10.6.2 allows the attacker to bypass its browser unlock function via incognito mode.

Adobe Genuine Service version 6.6 (and earlier) is affected by an Improper Access control vulnerability when handling symbolic links. An unauthenticated attacker could exploit this to elevate privileges in the context of the current user.

A vulnerability in all versions of Kantech EntraPass Editions could potentially allow an authorized low-privileged user to gain full system-level privileges by replacing critical files with specifically crafted files.

ZGR TPS200 NG in its 2.00 firmware version and 1.01 hardware version, does not properly accept specially constructed requests. This allows an attacker with access to the network where the affected asset is located, to operate and change several parameters without having to be registered as a user on the web that owns the device.

Rendertron versions prior to 3.0.0 are are susceptible to a Server-Side Request Forgery (SSRF) attack. An attacker can use a specially crafted webpage to force a rendertron headless chrome process to render internal sites it has access to, and display it as a screenshot. Suggested mitigations are to upgrade your rendertron to version 3.0.0, or, if you cannot update, to secure the infrastructure to limit the headless chrome's access to your internal domain.

Citrix ADC and Citrix/NetScaler Gateway before 13.0-82.41, 12.1-62.23, 11.1-65.20 and Citrix ADC 12.1-FIPS before 12.1-55.238 suffer from improper access control allowing SAML authentication hijack through a phishing attack to steal a valid user session. Note that Citrix ADC or Citrix Gateway must be configured as a SAML SP or a SAML IdP for this to be possible.

Improper access control in Nextcloud Social app version 0.3.1 allowed to read posts of any user.

Citrix Secure Mail for Android before 20.11.0 suffers from improper access control allowing unauthenticated access to read limited calendar related data stored within Secure Mail. Note that a malicious app would need to be installed on the Android device or a threat actor would need to execute arbitrary code on the Android device.

Improper access control in Citrix Workspace app for Windows 1912 CU1 and 2006.1 causes privilege escalation and code execution when the automatic updater service is running.

Improper access control in Nextcloud Deck 0.8.0 allowed an attacker to reshare boards shared with them with more permissions than they had themselves.

Improper access control in Nextcloud Deck 1.0.0 allowed an attacker to inject tasks into other users decks.

UniFi Cloud Key firmware <= v1.1.10 for Cloud Key gen2 and Cloud Key gen2 Plus contains a vulnerability that allows unrestricted root access through the serial interface (UART).

Improper access control in Groupfolders app 4.0.3 allowed to delete hidden directories when when renaming an accessible item to the same name.

A missing access control check in Nextcloud Server < 18.0.1, < 17.0.4, and < 16.0.9 causes hide-download shares to be downloadable when appending /download to the URL.

A missing check in Nextcloud Server 14.0.3 could give recipient the possibility to extend the expiration date of a share they received.

A bug in Nextcloud Server 14.0.4 could expose more data in reshared link shares than intended by the sharer.

A Improper Access Control vulnerability in the configuration of salt of SUSE Linux Enterprise Module for SUSE Manager Server 4.1, SUSE Manager Proxy 4.0, SUSE Manager Retail Branch Server 4.0, SUSE Manager Server 3.2, SUSE Manager Server 4.0 allows local users to escalate to root on every system managed by SUSE manager. On the managing node itself code can be executed as user salt, potentially allowing for escalation to root there. This issue affects: SUSE Linux Enterprise Module for SUSE Manage ... A Improper Access Control vulnerability in the configuration of salt of SUSE Linux Enterprise Module for SUSE Manager Server 4.1, SUSE Manager Proxy 4.0, SUSE Manager Retail Branch Server 4.0, SUSE Manager Server 3.2, SUSE Manager Server 4.0 allows local users to escalate to root on every system managed by SUSE manager. On the managing node itself code can be executed as user salt, potentially allowing for escalation to root there. This issue affects: SUSE Linux Enterprise Module for SUSE Manager Server 4.1 google-gson versions prior to 2.8.5-3.4.3, httpcomponents-client-4.5.6-3.4.2, httpcomponents-. SUSE Manager Proxy 4.0 release-notes-susemanager-proxy versions prior to 4.0.9-0.16.38.1. SUSE Manager Retail Branch Server 4.0 release-notes-susemanager-proxy versions prior to 4.0.9-0.16.38.1. SUSE Manager Server 3.2 salt-netapi-client versions prior to 0.16.0-4.14.1, spacewalk-. SUSE Manager Server 4.0 release-notes-susemanager versions prior to 4.0.9-3.54.1.

Show More

A vulnerability has been identified in Camstar Enterprise Platform (All versions), Opcenter Execution Core (All versions < V8.2). Authenticated users could have access to resources they normally would not have. This vulnerability could allow an attacker to view internal information and perform unauthorized changes.

A CWE-284 Improper Access Control vulnerability exists in EcoStruxure Building Operation WebReports V1.9 - V3.1 that could cause a remote attacker being able to access a restricted web resources due to improper access control.

A CWE-306: Missing Authentication for Critical Function vulnerability exists in Easergy T300 (with firmware 2.7 and older) that could cause a wide range of problems, including information exposure, denial of service, and command execution when access to a resource from an attacker is not restricted or incorrectly restricted.

A CWE-284: Improper Access Control vulnerability exists in EcoStruxureª and SmartStruxureª Power Monitoring and SCADA Software (see security notification for version information) that could allow a user the ability to perform actions via the web interface at a higher privilege level.

A CWE-284:Improper Access Control vulnerability exists in EcoStruxureª and SmartStruxureª Power Monitoring and SCADA Software (see security notification for version information) that could allow for arbitrary code execution on the server when an authorized user access an affected webpage.

A CWE-284 Improper Access Control vulnerability exists in SCADAPack 7x Remote Connect (V3.6.3.574 and prior) which allows an attacker to place executables in a specific folder and run code whenever RemoteConnect is executed by the user.

Exploiting incorrectly configured access control security levels vulnerability in ENS Firewall in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 April 2020 and 10.6.1 April 2020 updates allows remote attackers and local users to allow or block unauthorized traffic via pre-existing rules not being handled correctly when updating to the February 2020 updates.

Improper access control vulnerability in masvc.exe in McAfee Agent (MA) prior to 5.6.4 allows local users with administrator privileges to disable self-protection via a McAfee supplied command-line utility.

A vulnerability was discovered in Management component of Avaya Equinox Conferencing that could potentially allow an unauthenticated, remote attacker to gain access to screen sharing and whiteboard sessions. The affected versions of Management component of Avaya Equinox Conferencing include all 3.x versions before 3.17. Avaya Equinox Conferencing is now offered as Avaya Meetings Server.

In Emerson ValveLink v12.0.264 to v13.4.118, a vulnerability in the ValveLink software may allow a local, unprivileged, trusted insider to escalate privileges due to insecure configuration parameters.

Improper Access Control in the Kiosk Mode functionality of Bosch Recording Station allows a local unauthenticated attacker to escape from the Kiosk Mode and access the underlying operating system.

VMware GemFire versions prior to 9.10.0, 9.9.2, 9.8.7, and 9.7.6, and VMware Tanzu GemFire for VMs versions prior to 1.11.1 and 1.10.2, when deployed without a SecurityManager, contain a JMX service available which contains an insecure default configuration. This allows a malicious user to create an MLet mbean leading to remote code execution.

MH-WikiBot (an IRC Bot for interacting with the Miraheze API), had a bug that allowed any unprivileged user to access the steward commands on the IRC interface by impersonating the Nickname used by a privileged user as no check was made to see if they were logged in. The issue has been fixed in commit 23d9d5b0a59667a5d6816fdabb960b537a5f9ed1.

In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there are improper access controls on product page with combinations, attachments and specific prices. The problem is fixed in 1.7.6.5.

"In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there is improper access controls on product attributes page. The problem is fixed in 1.7.6.5.

In PrestaShop between versions 1.5.5.0 and 1.7.6.5, there is improper access control on customers search. The problem is fixed in 1.7.6.5.

In PrestaShop between versions 1.5.0.0 and 1.7.6.5, there are improper access control since the the version 1.5.0.0 for legacy controllers. - admin-dev/index.php/configure/shop/customer-preferences/ - admin-dev/index.php/improve/international/translations/ - admin-dev/index.php/improve/international/geolocation/ - admin-dev/index.php/improve/international/localization - admin-dev/index.php/configure/advanced/performance - admin-dev/index.php/sell/orders/delivery-slips/ - admin-dev/index.php?cont ... In PrestaShop between versions 1.5.0.0 and 1.7.6.5, there are improper access control since the the version 1.5.0.0 for legacy controllers. - admin-dev/index.php/configure/shop/customer-preferences/ - admin-dev/index.php/improve/international/translations/ - admin-dev/index.php/improve/international/geolocation/ - admin-dev/index.php/improve/international/localization - admin-dev/index.php/configure/advanced/performance - admin-dev/index.php/sell/orders/delivery-slips/ - admin-dev/index.php?controller=AdminStatuses The problem is fixed in 1.7.6.5

Show More

In BuddyPress before 5.1.2, requests to a certain REST API endpoint can result in private user data getting exposed. Authentication is not needed. This has been patched in version 5.1.2.

openHAB before 2.5.2 allow a remote attacker to use REST calls to install the EXEC binding or EXEC transformation service and execute arbitrary commands on the system with the privileges of the user running openHAB. Starting with version 2.5.2 all commands need to be whitelisted in a local file which cannot be changed via REST calls.

HCL Domino is affected by an Insufficient Access Control vulnerability. An authenticated attacker with local access to the system could exploit this vulnerability to attain escalation of privileges, denial of service, or information disclosure.

In Conjur OSS Helm Chart before 2.0.0, a recently identified critical vulnerability resulted in the installation of the Conjur Postgres database with an open port. This allows an attacker to gain full read & write access to the Conjur Postgres database, including escalating the attacker's privileges to assume full control. A malicious actor who knows the IP address and port number of the Postgres database and has access into the Kubernetes cluster where Conjur runs can gain full read & write acc ... In Conjur OSS Helm Chart before 2.0.0, a recently identified critical vulnerability resulted in the installation of the Conjur Postgres database with an open port. This allows an attacker to gain full read & write access to the Conjur Postgres database, including escalating the attacker's privileges to assume full control. A malicious actor who knows the IP address and port number of the Postgres database and has access into the Kubernetes cluster where Conjur runs can gain full read & write access to the Postgres database. This enables the attacker to write a policy that allows full access to retrieve any secret. This Helm chart is a method to install Conjur OSS into a Kubernetes environment. Hence, the systems impacted are only Conjur OSS systems that were deployed using this chart. Other deployments including Docker and the CyberArk Dynamic Access Provider (DAP) are not affected. To remediate this vulnerability, clone the latest Helm Chart and follow the upgrade instructions. If you are not able to fully remediate this vulnerability immediately, you can mitigate some of the risk by making sure Conjur OSS is deployed on an isolated Kubernetes cluster or namespace. The term "isolated" refers to: - No other workloads besides Conjur OSS and its backend database are running in that Kubernetes cluster/namespace. - Kubernetes and helm access to the cluster/namespace is limited to security administrators via Role-Based Access Control (RBAC).

Show More

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system. The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges ... A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system. The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. This could allow the attacker to modify the configuration of an affected system.

Show More