Vulnerabilities (CVE)

A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authe ... A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a set of crafted, malicious commands at the administrative shell. An exploit could allow the attacker to gain root access on the device. Cisco Bug IDs: CSCvb34303, CSCvb35726.

Show More

A vulnerability in the network-operator user role implementation for Cisco NX-OS System Software could allow an authenticated, local attacker to improperly delete valid user accounts. The network-operator role should not be able to delete other configured users on the device. The vulnerability is due to a lack of proper role-based access control (RBAC) checks for the actions that a user with the network-operator role is allowed to perform. An attacker could exploit this vulnerability by authenti ... A vulnerability in the network-operator user role implementation for Cisco NX-OS System Software could allow an authenticated, local attacker to improperly delete valid user accounts. The network-operator role should not be able to delete other configured users on the device. The vulnerability is due to a lack of proper role-based access control (RBAC) checks for the actions that a user with the network-operator role is allowed to perform. An attacker could exploit this vulnerability by authenticating to the device with user credentials that give that user the network-operator role. Successful exploitation could allow the attacker to impact the integrity of the device by deleting configured user credentials. The attacker would need valid user credentials for the device. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 3600 Platform Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvg21120.

Show More

A vulnerability in the Policy and Charging Rules Function (PCRF) of the Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The attacker would also have to have access to the internal VLAN where CPS is deployed. The vulnerability is due to incorrect permissions of certain system files and not sufficiently protecting sensitive data that is at rest. An attacker could ... A vulnerability in the Policy and Charging Rules Function (PCRF) of the Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The attacker would also have to have access to the internal VLAN where CPS is deployed. The vulnerability is due to incorrect permissions of certain system files and not sufficiently protecting sensitive data that is at rest. An attacker could exploit the vulnerability by using certain tools available on the internal network interface to request and view system files. An exploit could allow the attacker to find out sensitive information about the application. Cisco Bug IDs: CSCvf77666.

Show More

On Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices, the users on the device are divided into 2 groups "admin" and "user". However, as a part of security analysis it was identified that a low privileged user who belongs to the "user" group and who has access to login in to the web administrative interface of the device can add a new administrative user to the interface using HTTP APIs provided by the device and perform all the actions as an administrative user by using that account. If the fir ... On Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices, the users on the device are divided into 2 groups "admin" and "user". However, as a part of security analysis it was identified that a low privileged user who belongs to the "user" group and who has access to login in to the web administrative interface of the device can add a new administrative user to the interface using HTTP APIs provided by the device and perform all the actions as an administrative user by using that account. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable functions that performs the various action described in HTTP APIs. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function at address 0x00429084 in IDA pro is the one that processes the HTTP API request for "addUser" action. If one traces the calls to this function, it can be clearly seen that the function sub_ 41F38C at address 0x0041F588 parses the call received from the browser and passes it to the "addUser" function without any authorization check.

Show More

Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices mishandle reboots within the past two hours. Amcrest cloud services does not perform a thorough verification when allowing the user to add a new camera to the user's account to ensure that the user actually owns the camera other than knowing the serial number of the camera. This can allow an attacker who knows the serial number to easily add another user's camera to an attacker's cloud account and control it completely. This is possible in case ... Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices mishandle reboots within the past two hours. Amcrest cloud services does not perform a thorough verification when allowing the user to add a new camera to the user's account to ensure that the user actually owns the camera other than knowing the serial number of the camera. This can allow an attacker who knows the serial number to easily add another user's camera to an attacker's cloud account and control it completely. This is possible in case of any camera that is currently not a part of an Amcrest cloud account or has been removed from the user's cloud account. Also, another requirement for a successful attack is that the user should have rebooted the camera in the last two hours. However, both of these conditions are very likely for new cameras that are sold over the Internet at many ecommerce websites or vendors that sell the Amcrest products. The successful attack results in an attacker being able to completely control the camera which includes being able to view and listen on what the camera can see, being able to change the motion detection settings and also be able to turn the camera off without the user being aware of it. Note: The same attack can be executed using the Amcrest Cloud mobile application.

Show More

The post-pay-counter plugin before 2.731 for WordPress has no permissions check for an update-settinga action.

In cPanel before 62.0.17, addon domain conversion did not require a package for resellers (SEC-208).

cPanel before 64.0.21 allows attackers to read a user's crontab file during a short time interval upon a cPAddon upgrade (SEC-257).

cPanel before 64.0.21 allows certain file-chmod operations via /scripts/convert_roundcube_mysql2sqlite (SEC-255).

In cPanel before 67.9999.103, the backup system overwrites root's home directory when a mount disappears (SEC-299).

cPanel before 68.0.15 allows attackers to read root's crontab file during a short time interval upon enabling or disabling sqloptimizer (SEC-332).

cPanel before 68.0.15 writes home-directory backups to an incorrect location (SEC-309).

An improper authorization check in the User API in TheHive before 2.13.4 and 3.x before 3.3.1 allows users with read-only or read/write access to escalate their privileges to the administrator's privileges. This affects app/controllers/UserCtrl.scala.

In ManageEngine Applications Manager 12 and 13 before build 13200, an authenticated user is able to alter all of their own properties, including own group, i.e. changing their group to one with higher privileges like "ADMIN". A user is also able to change properties of another user, e.g. change another user's password.

On Windows endpoints, the SecureConnector agent must run under the local SYSTEM account or another administrator account in order to enable full functionality of the agent. The typical configuration is for the agent to run as a Windows service under the local SYSTEM account. The SecureConnector agent runs various plugin scripts and executables on the endpoint in order to gather and report information about the host to the CounterACT management appliance. The SecureConnector agent downloads these ... On Windows endpoints, the SecureConnector agent must run under the local SYSTEM account or another administrator account in order to enable full functionality of the agent. The typical configuration is for the agent to run as a Windows service under the local SYSTEM account. The SecureConnector agent runs various plugin scripts and executables on the endpoint in order to gather and report information about the host to the CounterACT management appliance. The SecureConnector agent downloads these scripts and executables as needed from the CounterACT management appliance and runs them on the endpoint. By default, these executable files are downloaded to and run from the %TEMP% directory of the currently logged on user, despite the fact that the SecureConnector agent is running as SYSTEM. Aside from the downloaded scripts, the SecureConnector agent runs a batch file with SYSTEM privileges from the temp directory of the currently logged on user. If the naming convention of this script can be derived, which is made possible by placing it in a directory to which the user has read access, it may be possible overwrite the legitimate batch file with a malicious one before SecureConnector executes it. It is possible to change this directory by setting the the configuration property config.script_run_folder.value in the local.properties configuration file on the CounterACT management appliance, however the batch file which is run does not follow this property.

Show More

On Windows endpoints, the SecureConnector agent must run under the local SYSTEM account or another administrator account in order to enable full functionality of the agent. The typical configuration is for the agent to run as a Windows service under the local SYSTEM account. The SecureConnector agent runs various plugin scripts and executables on the endpoint in order to gather and report information about the host to the CounterACT management appliance. The SecureConnector agent downloads these ... On Windows endpoints, the SecureConnector agent must run under the local SYSTEM account or another administrator account in order to enable full functionality of the agent. The typical configuration is for the agent to run as a Windows service under the local SYSTEM account. The SecureConnector agent runs various plugin scripts and executables on the endpoint in order to gather and report information about the host to the CounterACT management appliance. The SecureConnector agent downloads these scripts and executables as needed from the CounterACT management appliance and runs them on the endpoint. The SecureConnector agent fails to set any permissions on downloaded file objects. This allows a malicious user to take ownership of any of these files and make modifications to it, regardless of where the files are saved. These files are then executed under SYSTEM privileges. A malicious unprivileged user can overwrite these executable files with malicious code before the SecureConnector agent executes them, causing the malicious code to be run under the SYSTEM account.

Show More

NetIQ eDirectory versions prior to 9.0.2, under some circumstances, could be susceptible to downgrade of communication security.

An issue where WebExtensions can use the mozAddonManager API to elevate privilege due to privileged pages being allowed in the permissions list. This allows a malicious extension to then install additional extensions without explicit user permission. This vulnerability affects Firefox < 50.

WebExtensions can bypass security checks to load privileged URLs and potentially escape the WebExtension sandbox. This vulnerability affects Firefox < 50.

A maliciously crafted page loaded to the sidebar through a bookmark can reference a privileged chrome window and engage in limited JavaScript operations violating cross-origin protections. This vulnerability affects Firefox < 50.

The Windows installer that the Apache CouchDB team provides was vulnerable to local privilege escalation. All files in the install inherit the file permissions of the parent directory and therefore a non-privileged user can substitute any executable for the nssm.exe service launcher, or CouchDB batch or binary files. A subsequent service or server restart will then run that binary with administrator privilege. This issue affected CouchDB 2.0.0 (Windows platform only) and was addressed in CouchDB ... The Windows installer that the Apache CouchDB team provides was vulnerable to local privilege escalation. All files in the install inherit the file permissions of the parent directory and therefore a non-privileged user can substitute any executable for the nssm.exe service launcher, or CouchDB batch or binary files. A subsequent service or server restart will then run that binary with administrator privilege. This issue affected CouchDB 2.0.0 (Windows platform only) and was addressed in CouchDB 2.0.0.1.

Show More

It was discovered that EAP packages in certain versions of Red Hat Enterprise Linux use incorrect permissions for /etc/sysconfig/jbossas configuration files. The file is writable to jboss group (root:jboss, 664). On systems using classic /etc/init.d init scripts (i.e. on Red Hat Enterprise Linux 6 and earlier), the file is sourced by the jboss init script and its content executed with root privileges when jboss service is started, stopped, or restarted.

Jboss jbossas before versions 5.2.0-23, 6.4.13, 7.0.5 is vulnerable to an unsafe file handling in the jboss init script which could result in local privilege escalation.

Red Hat Keycloak before version 2.4.0 did not correctly check permissions when handling service account user deletion requests sent to the rest server. An attacker with service account authentication could use this flaw to bypass normal permissions and delete users in a separate realm.

A remote privilege elevation vulnerability in HPE Matrix Operating Environment version 7.6 was found.

A remote priviledge escalation vulnerability in HPE Matrix Operating Environment version 7.6 was found.

A Remote Escalation of Privilege vulnerability in HPE Helion Eucalyptus version 3.3.0 through 4.3.1 was found.

An elevation of privilege vulnerability in Qualcomm closed source components. Product: Android. Versions: Android kernel. Android ID: A-31625756.

An elevation of privilege vulnerability in Qualcomm closed source components. Product: Android. Versions: Android kernel. Android ID: A-28823724.

An elevation of privilege vulnerability in Qualcomm closed source components. Product: Android. Versions: Android kernel. Android ID: A-28823575.

An elevation of privilege vulnerability in the NVIDIA GPU driver. Product: Android. Versions: Android kernel. Android ID: A-31799863. References: N-CVE-2016-8482.

A privilege escalation flaw was found in the Ansible Tower. When Tower before 3.0.3 deploys a PostgreSQL database, it incorrectly configures the trust level of postgres user. An attacker could use this vulnerability to gain admin level access to the database.

Android devices with code from Ragentek contain a privileged binary that performs over-the-air (OTA) update checks. Additionally, there are multiple techniques used to hide the execution of this binary. This behavior could be described as a rootkit. This binary, which resides as /system/bin/debugs, runs with root privileges and does not communicate over an encrypted channel. The binary has been shown to communicate with three hosts via HTTP: oyag[.]lhzbdvm[.]com oyag[.]prugskh[.]net oyag[.]prugs ... Android devices with code from Ragentek contain a privileged binary that performs over-the-air (OTA) update checks. Additionally, there are multiple techniques used to hide the execution of this binary. This behavior could be described as a rootkit. This binary, which resides as /system/bin/debugs, runs with root privileges and does not communicate over an encrypted channel. The binary has been shown to communicate with three hosts via HTTP: oyag[.]lhzbdvm[.]com oyag[.]prugskh[.]net oyag[.]prugskh[.]com Server responses to requests sent by the debugs binary include functionalities to execute arbitrary commands as root, install applications, or update configurations. Examples of a request sent by the client binary: POST /pagt/agent?data={"name":"c_regist","details":{...}} HTTP/1. 1 Host: 114.80.68.223 Connection: Close An example response from the server could be: HTTP/1.1 200 OK {"code": "01", "name": "push_commands", "details": {"server_id": "1" , "title": "Test Command", "comments": "Test", "commands": "touch /tmp/test"}} This binary is reported to be present in the following devices: BLU Studio G BLU Studio G Plus BLU Studio 6.0 HD BLU Studio X BLU Studio X Plus BLU Studio C HD Infinix Hot X507 Infinix Hot 2 X510 Infinix Zero X506 Infinix Zero 2 X509 DOOGEE Voyager 2 DG310 LEAGOO Lead 5 LEAGOO Lead 6 LEAGOO Lead 3i LEAGOO Lead 2S LEAGOO Alfa 6 IKU Colorful K45i Beeline Pro 2 XOLO Cube 5.0

Show More

This vulnerability allows an attacker to use the Mozilla Maintenance Service to escalate privilege by having the Maintenance Service invoke the Mozilla Updater to run malicious local files. This vulnerability requires local system access and is a variant of MFSA2013-44. Note: this issue only affects Windows operating systems. This vulnerability affects Firefox < 50.

A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.

UDM provides support for running commands after a download is completed, this is currently made use of for click package installation. This functionality was not restricted to unconfined applications. Before UDM version 1.2+16.04.20160408-0ubuntu1 any confined application could make use of the UDM C++ API to run arbitrary commands in an unconfined environment as the phablet user.

The woocommerce-exporter plugin before 1.8.4 for WordPress has privilege escalation.

The advanced-ajax-page-loader plugin before 2.7.7 for WordPress has no protection against the reading of uploaded files when not logged in.

The woocommerce-store-toolkit plugin before 1.5.8 for WordPress has privilege escalation.

The woocommerce-store-toolkit plugin before 1.5.7 for WordPress has privilege escalation.