Vulnerabilities (CVE)

This vulnerability is caused by a CWE‑159: "Improper Handling of Invalid Use of Special Elements" weakness, which leads to an unrecoverable inconsistency in the CLFS.sys driver. This condition forces a call to the KeBugCheckEx function, allowing an unprivileged user to trigger a system crash. Microsoft silently fixed this vulnerability in the September 2025 cumulative update for Windows 11 2024 LTSC and Windows Server 2025. Windows 25H2 (released in September) was released with the patch. Window ... This vulnerability is caused by a CWE‑159: "Improper Handling of Invalid Use of Special Elements" weakness, which leads to an unrecoverable inconsistency in the CLFS.sys driver. This condition forces a call to the KeBugCheckEx function, allowing an unprivileged user to trigger a system crash. Microsoft silently fixed this vulnerability in the September 2025 cumulative update for Windows 11 2024 LTSC and Windows Server 2025. Windows 25H2 (released in September) was released with the patch. Windows 1123h2 and earlier versions remain vulnerable.

Show More

ssh in OpenSSH before 10.1 allows control characters in usernames that originate from certain possibly untrusted sources, potentially leading to code execution when a ProxyCommand is used. The untrusted sources are the command line and %-sequence expansion of a configuration file. (A configuration file that provides a complete literal username is not categorized as an untrusted source.)

Meshtastic firmware is a device firmware for the Meshtastic project. The Meshtastic firmware does not check for packets claiming to be from the special broadcast address (0xFFFFFFFF) which could result in unexpected behavior and potential for DDoS attacks on the network. A malicious actor could craft a packet to be from that address which would result in an amplification of this one message into every node on the network sending multiple messages. Such an attack could result in degraded network ... Meshtastic firmware is a device firmware for the Meshtastic project. The Meshtastic firmware does not check for packets claiming to be from the special broadcast address (0xFFFFFFFF) which could result in unexpected behavior and potential for DDoS attacks on the network. A malicious actor could craft a packet to be from that address which would result in an amplification of this one message into every node on the network sending multiple messages. Such an attack could result in degraded network performance for all users as the available bandwidth is consumed. This issue has been addressed in release version 2.5.6. All users are advised to upgrade. There are no known workarounds for this vulnerability.

Show More

RISC Zero is a zero-knowledge verifiable general computing platform, with Ethereum integration. The risc0-ethereum repository contains Solidity verifier contracts, Steel EVM view call library, and supporting code. Prior to versions 2.1.1 and 2.2.0, the `Steel.validateCommitment` Solidity library function will return `true` for a crafted commitment with a digest value of zero. This violates the semantics of `validateCommitment`, as this does not commitment to a block that is in the current chain. ... RISC Zero is a zero-knowledge verifiable general computing platform, with Ethereum integration. The risc0-ethereum repository contains Solidity verifier contracts, Steel EVM view call library, and supporting code. Prior to versions 2.1.1 and 2.2.0, the `Steel.validateCommitment` Solidity library function will return `true` for a crafted commitment with a digest value of zero. This violates the semantics of `validateCommitment`, as this does not commitment to a block that is in the current chain. Because the digest is zero, it does not correspond to any block and there exist no known openings. As a result, this commitment will never be produced by a correct zkVM guest using Steel and leveraging this bug to compromise the soundness of a program using Steel would require a separate bug or misuse of the Steel library, which is expected to be used to validate the root of state opening proofs. A fix has been released as part of `risc0-ethereum` 2.1.1 and 2.2.0. Users for the `Steel` Solidity library versions 2.1.0 or earlier should ensure they are using `Steel.validateCommitment` in tandem with zkVM proof verification of a Steel program, as shown in the ERC-20 counter example, and documentation. This is the correct usage of Steel, and users following this pattern are not at risk, and do not need to take action. Users not verifying a zkVM proof of a Steel program should update their application to do so, as this is incorrect usage of Steel.

Show More

An incorrect handling of a special element in Busybox's ash applet leads to denial of service when processing a crafted shell command, due to the shell mistaking specific characters for reserved characters. This may be used for DoS under rare conditions of filtered command input.

In PHP versions 7.3.x below 7.3.33, 7.4.x below 7.4.26 and 8.0.x below 8.0.13, certain XML parsing functions, like simplexml_load_file(), URL-decode the filename passed to them. If that filename contains URL-encoded NUL character, this may cause the function to interpret this as the end of the filename, thus interpreting the filename differently from what the user intended, which may lead it to reading a different file than intended.

Failure to Sanitize host header value on output in the GateManager Web server could allow an attacker to conduct web cache poisoning attacks. This issue affects Secomea GateManager all versions prior to 9.3

On Juniper Networks Junos OS devices, a stream of TCP packets sent to the Routing Engine (RE) may cause mbuf leak which can lead to Flexible PIC Concentrator (FPC) crash or the system to crash and restart (vmcore). This issue can be trigged by IPv4 or IPv6 and it is caused only by TCP packets. This issue is not related to any specific configuration and it affects Junos OS releases starting from 17.4R1. However, this issue does not affect Junos OS releases prior to 18.2R1 when Nonstop active rout ... On Juniper Networks Junos OS devices, a stream of TCP packets sent to the Routing Engine (RE) may cause mbuf leak which can lead to Flexible PIC Concentrator (FPC) crash or the system to crash and restart (vmcore). This issue can be trigged by IPv4 or IPv6 and it is caused only by TCP packets. This issue is not related to any specific configuration and it affects Junos OS releases starting from 17.4R1. However, this issue does not affect Junos OS releases prior to 18.2R1 when Nonstop active routing (NSR) is configured [edit routing-options nonstop-routing]. The number of mbufs is platform dependent. The following command provides the number of mbufs counter that are currently in use and maximum number of mbufs that can be allocated on a platform: user@host> show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs, the FPC crashes or the vmcore occurs and the device might become inaccessible requiring a manual restart. This issue affects Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions prior to 18.2X75-D41, 18.2X75-D420.12, 18.2X75-D51, 18.2X75-D60, 18.2X75-D34; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Versions of Junos OS prior to 17.4R1 are unaffected by this vulnerability.

Show More

On Juniper Networks Junos OS and Junos OS Evolved devices, processing a specific BGP packet can lead to a routing process daemon (RPD) crash and restart. This issue can occur even before the BGP session with the peer is established. Repeated receipt of this specific BGP packet can result in an extended Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 18.2X75 versions starting from 18.2X75-D50.8, 18.2X75-D60 and later versions, prior to 18.2X75-D52.8, 18.2X75-D53, ... On Juniper Networks Junos OS and Junos OS Evolved devices, processing a specific BGP packet can lead to a routing process daemon (RPD) crash and restart. This issue can occur even before the BGP session with the peer is established. Repeated receipt of this specific BGP packet can result in an extended Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 18.2X75 versions starting from 18.2X75-D50.8, 18.2X75-D60 and later versions, prior to 18.2X75-D52.8, 18.2X75-D53, 18.2X75-D60.2, 18.2X75-D65.1, 18.2X75-D70; 19.4 versions 19.4R1 and 19.4R1-S1; 20.1 versions prior to 20.1R1-S2, 20.1R2. Juniper Networks Junos OS Evolved: 19.4-EVO versions prior to 19.4R2-S2-EVO; 20.1-EVO versions prior to 20.1R2-EVO. This issue does not affect: Juniper Networks Junos OS releases prior to 19.4R1. Juniper Networks Junos OS Evolved releases prior to 19.4R1-EVO.

Show More

On Juniper Networks Junos OS and Junos OS Evolved devices, processing a specific UPDATE for an EBGP peer can lead to a routing process daemon (RPD) crash and restart. This issue occurs only when the device is receiving and processing the BGP UPDATE for an EBGP peer. This issue does not occur when the device is receiving and processing the BGP UPDATE for an IBGP peer. However, the offending BGP UPDATE can originally come from an EBGP peer, propagates through the network via IBGP peers without cau ... On Juniper Networks Junos OS and Junos OS Evolved devices, processing a specific UPDATE for an EBGP peer can lead to a routing process daemon (RPD) crash and restart. This issue occurs only when the device is receiving and processing the BGP UPDATE for an EBGP peer. This issue does not occur when the device is receiving and processing the BGP UPDATE for an IBGP peer. However, the offending BGP UPDATE can originally come from an EBGP peer, propagates through the network via IBGP peers without causing crash, then it causes RPD crash when it is processed for a BGP UPDATE towards an EBGP peer. Repeated receipt and processing of the same specific BGP UPDATE can result in an extended Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 17.3R3-S6, 17.4R2-S7, and 18.1R3-S7. Juniper Networks Junos OS Evolved 19.2R2-EVO and later versions, prior to 19.3R1-EVO. Other Junos OS releases are not affected.

Show More

The PrinterLogic Print Management software, versions up to and including 18.3.1.96, does not sanitize special characters allowing for remote unauthorized changes to configuration files. An unauthenticated attacker may be able to remotely execute arbitrary code with SYSTEM privileges.